M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 25/64
A 25/64 inch coolant-fed drill delivers coolant directly to the cutting zone for deep-hole drilling efficiency
- 5x coolant-fed design clears chips efficiently
- 25/64 inch diameter suits precise hole sizing
- Twister XD geometry enhances drilling performance
- M.A. Ford brand trusted for industrial tooling
- California Prop 65 warning discloses chemical hazards
M.A. Ford Twister XD 5X Drill 25/64
The M.A. Ford Twister XD 5X is a coolant-fed drill designed for precision hole-making. It targets machinists and metalworking professionals who require reliable performance in demanding applications. The tool carries the manufacturer part number 2XDCR3906A.
Suited for production drilling with internal coolant
This drill suits workshops running CNC machines or lathes with through-spindle coolant capability. Buyers needing a standard twist drill without coolant channels or those working exclusively in handheld operations should look at something else.
25/64 inch diameter defines the hole size
The 25/64 inch cutting diameter is the critical specification that determines fit for your tapping or clearance requirements. Verify this exact size against your drawing before purchase. The product carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- 5x coolant-fed design clears chips efficiently
- 25/64 inch diameter suits precise hole sizing
- Twister XD geometry enhances drilling performance
- M.A. Ford brand trusted for industrial tooling
- California Prop 65 warning discloses chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 25/64 Twister XD 5X drill require in the holder?
The 25/64 diameter shank fits a standard 25/64 collet or three-jaw chuck; ensure the holder is rated for coolant-through operation.
How is the coolant fed through the 2XDCR3906A drill during installation?
Connect the machine’s through-spindle coolant supply to the drill’s internal channels; the common error is forgetting to seal the holder’s coolant ports before starting.
When should the 25/64 Twister XD 5X drill be replaced?
Replace the drill when flank wear reaches the manufacturer’s limit or when hole diameter exceeds tolerance; inspect cutting edges after each production run.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
