M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 19.25 mm
Coolant-fed 19.25 mm drill delivers five-times-diameter depth in a single pass
- 25 mm diameter drills precise holes
- Coolant-fed design removes heat during deep cuts
- 5× diameter reach handles extended drilling tasks
- Twister XD geometry improves chip evacuation
- M.A. Ford quality built for professional use
Twister XD 5X Coolant-Fed Drill
The M.A. Ford Twister XD 5X is a coolant-fed drill built for 19.25 mm holes in demanding materials. It targets machinists and fabricators who need deep-hole capability with consistent chip evacuation through internal coolant delivery. The tool suits production environments where through-spindle cooling is available and process reliability matters.
Thermal management and power draw
Internal coolant channels carry fluid directly to the cutting zone, controlling heat during extended cycles. This reduces thermal expansion in the workpiece and helps maintain dimensional accuracy. The design supports steady cutting loads without the temperature spikes common in external-flood setups. Power consumption follows the machine spindle and feed rates selected for the application.
Bundled accessories and software
No accessories, software or documentation are listed in the supplier data. The drill ships as a single cutting tool without inserts, wrenches or digital resources. Operators must supply compatible tool holders, coolant fittings and CAM strategies separately. Buyers who need a complete kitted solution should source those items from their standard tooling supplier.
Highlights
- 25 mm diameter drills precise holes
- Coolant-fed design removes heat during deep cuts
- 5× diameter reach handles extended drilling tasks
- Twister XD geometry improves chip evacuation
- M.A. Ford quality built for professional use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I fit the 19.25 mm Twister XD 5X into my machine and what step is often missed?
Clamp the shank securely in a compatible holder, then connect the coolant feed before starting — operators often forget to prime the internal coolant passage.
What part of the 19.25 mm drill will need replacement first?
The cutting edges wear before the shank or coolant channel; plan to regrind or replace the drill once the margins dull.
What limit appears first when running the 19.25 mm Twister XD 5X continuously?
Heat buildup at the cutting zone becomes the limiting factor; sustained feed rates require consistent coolant flow to prevent premature edge failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
