M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 15.30Mm
Twister Xd 5X coolant-fed drill bores 15.30 mm holes with internal lubrication delivery
- 5× depth capability for faster through-hole drilling
- 30 mm diameter suits standard metric hole sizes
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
Twister Xd 5X coolant-fed drill 15.30 mm
The Twister Xd 5X is a coolant-fed drill bit from M.A. Ford with a 15.30 mm diameter. It is designed for machinists and maintenance engineers who need deep-hole drilling with internal coolant delivery. The tool suits CNC and manual machines equipped for through-spindle coolant.
Internal coolant channel changes chip control
The 5X coolant-fed design routes fluid through the tool body to the cutting zone. This flushes chips from deep holes and reduces heat at the cutting edges. The result is straighter holes, longer tool life and less frequent peck cycles compared with external flood coolant alone.
15.30 mm diameter defines the hole size
The drill produces a 15.30 mm hole in a single pass up to five times the diameter depth. It handles steel, cast iron and high-temperature alloys when the machine provides adequate coolant pressure. It is not suited for diameters larger or smaller than 15.30 mm, for dry machining or for machines without through-spindle coolant capability.
Highlights
- 5× depth capability for faster through-hole drilling
- 30 mm diameter suits standard metric hole sizes
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 15.30 mm coolant-fed drill need re-sharpening or replacement after repeated use?
The Twister Xd 5X drill is a consumable cutting tool; the 15.30 mm carbide tip will dull over time and requires professional re-grinding or full replacement once cutting edges wear beyond tolerance.
What limits continuous drilling depth with the 5X coolant-fed design?
The 5X diameter-to-length ratio sets the maximum effective drilling depth at approximately five times the 15.30 mm diameter before chip evacuation and coolant pressure become limiting factors.
How much heat and power draw should I expect when running the 15.30 mm drill all day?
Heat generation and spindle power depend on workpiece material, cutting speed and feed rate; the through-coolant design (2XDCR6024A) directs coolant to the cutting zone to manage temperature during extended cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
