M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 14.70 mm 2XDCR5787A
Coolant-fed Twister XD drill bores 14.70 mm holes at five-times diameter depth
- Coolant-fed design clears chips for deeper holes
- 5× diameter reach extends drilling capacity
- 70 mm diameter fits precise hole requirements
- Twister XD geometry improves cutting performance
- California Prop 65 warning informs safe handling
M.A. Ford Twister XD 5X Coolant Fed Drill
The M.A. Ford Twister XD 5X Coolant Fed Drill is a precision cutting tool designed for high-performance drilling applications. It features a 14.70 mm diameter and internal coolant channels for efficient chip evacuation and temperature control. This new tool carries the manufacturer part number 2XDCR5787A. It is built for demanding industrial environments requiring accurate hole placement.
Suited for CNC machining and high-volume production
This drill suits machinists operating CNC equipment with through-spindle coolant capability who need reliable performance in steel or exotic alloys. It is not for buyers lacking coolant-fed spindles or those drilling shallow holes where external flood coolant is sufficient. Hand-held drilling operations cannot utilise the internal coolant design effectively. Workshops without rigid tool-holding systems should look at alternative tooling.
14.70 mm cutting diameter
The 14.70 mm diameter is the primary specification that determines compatibility with the required hole size and pre-drill conditions. This exact measurement dictates whether the tool matches the specific bore tolerance and depth requirements of the current job. Verifying this dimension against the engineering drawing confirms the correct part selection before purchase.
Highlights
- Coolant-fed design clears chips for deeper holes
- 5× diameter reach extends drilling capacity
- 70 mm diameter fits precise hole requirements
- Twister XD geometry improves cutting performance
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 14.70 mm Twister XD 5X coolant-fed drill in my machine spindle?
Mount the drill securely in a compatible tool holder, connect the coolant supply to the through-tool port, and verify coolant flow before starting the spindle.
What maintenance will the 2XDCR5787A drill need during its service life?
Inspect the cutting edges for wear after each job, clean the internal coolant passages to prevent blockage, and replace the drill when flank wear reaches the toolholder limit.
What is the first limit I will hit when running the 14.70 mm drill continuously?
The internal coolant channels can clog with fine chips during sustained drilling, reducing cooling and causing premature edge failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
