M.A. Ford
M.A. Ford Twister Xd 3X Solid Carbide Drill 6.40 mm
Solid carbide drill with a 6.40 mm diameter for high-precision holemaking
- Solid carbide construction resists wear for longer tool life
- 3X flute design improves chip evacuation during drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd geometry reduces cutting forces for smoother operation
- M.A. Ford manufacturing delivers consistent quality for professional use
Twister Xd 3X Solid Carbide Drill
The M.A. Ford Twister Xd 3X is a solid carbide drill bit measuring 6.40 mm in diameter. It is engineered for precision drilling in demanding machining applications where tool rigidity and wear resistance are critical. Machinists and metalworkers select this bit for its ability to maintain sharpness and hole accuracy in tough alloys.
Build quality and shank implications
Solid carbide construction provides high hardness and heat resistance for extended tool life in abrasive materials. The 3X designation indicates a length-to-diameter ratio suited for moderately deep holes without excessive deflection. A standard cylindrical shank fits common collets and drill chucks for secure, concentric clamping.
Diameter determines fit
The 6.40 mm cutting diameter is the single specification that decides whether this drill produces the required hole size for tapping, reaming or clearance operations. Buyers needing a different hole diameter must select another size.
Highlights
- Solid carbide construction resists wear for longer tool life
- 3X flute design improves chip evacuation during drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd geometry reduces cutting forces for smoother operation
- M.A. Ford manufacturing delivers consistent quality for professional use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 6.40 mm Twister Xd 3X drill use, and what chuck size does that limit?
It has a straight round shank sized to 6.40 mm, so it fits any three-jaw chuck or collet that accepts 6.40 mm or larger.
What flute length and overall length must the machine spindle accommodate?
The flute length is 2520 mm and the overall length is 65 mm, so the spindle travel and tool holder must clear at least 65 mm.
How is the drill mounted, and what alignment step is often missed?
Clamp the straight shank in a collet or three-jaw chuck, then check run-out at the tip with a dial indicator before cutting; skipping the run-out check causes premature wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
