M.A. Ford
M.A. Ford Twister XD 3X Solid Carbide Drill 4.60 mm
Solid carbide drill creates precise 4.60 mm holes with 3X diameter depth capability
- 60 mm solid carbide drill bit for precise holes
- Twister XD 3X geometry improves chip evacuation
- M.A. Ford manufacturing ensures consistent quality
- New condition guarantees full tool life
- California Prop 65 notice included for safety awareness
Twister XD 3X solid carbide drill
The M.A. Ford Twister XD 3X is a solid carbide drill bit sized at 4.60 mm for precision holemaking. It suits professional machinists and maintenance technicians who need reliable performance in steel, cast iron and similar materials. The 3X diameter flute length supports deeper drilling without Peck cycles. California Proposition 65 warnings apply to this product.
Thermals noise and power draw
Heat generation and cutting noise depend on the machine spindle speed, feed rate and workpiece material rather than the drill itself. Solid carbide construction allows higher cutting speeds that can reduce cycle time and overall energy use per hole. No independent thermal or acoustic ratings are published for this tool. Power consumption is determined by the drilling machine and cutting parameters selected.
Bundled accessories and software
The drill is supplied as a single cutting tool with no additional accessories, coatings or software included. The manufacturer highlight referencing free shipping and direct dispatch describes logistics, not product contents. Users must provide suitable tool holders, coolant supply and machine programming separately. No digital resources or licence keys are bundled with the item.
Highlights
- 60 mm solid carbide drill bit for precise holes
- Twister XD 3X geometry improves chip evacuation
- M.A. Ford manufacturing ensures consistent quality
- New condition guarantees full tool life
- California Prop 65 notice included for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 4.60 mm Twister XD 3X drill in my drill press, and what step do users often skip?
Secure the shank fully in a clean collet or chuck, then verify run-out before starting; the step most often skipped is checking concentricity at the tip.
What maintenance or replacement will the solid carbide 4.60 mm drill need after extended use?
The solid carbide body cannot be resharpened economically; once the cutting edges dull or chip, replace the entire drill.
What limit appears first when drilling continuously with the 4.60 mm Twister XD 3X?
Heat buildup at the cutting edges is the first limiting factor; use appropriate coolant and peck cycles to manage temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
