M.A. Ford
M.A. Ford Twister Xd 3X Solid Carbide Drill 4.50mm
A 4.50 mm solid-carbide Twister Xd 3X drill for high-performance drilling in demanding materials
- Solid carbide construction resists wear for longer tool life
- 3X diameter drilling depth reaches deeper holes in one pass
- 50 mm diameter suits precise metric hole requirements
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 listed for chemical safety awareness
Application fit
This M.A. Ford Twister Xd drill is a solid carbide tool built for 4.50 mm holes in metalworking and maintenance tasks. It suits machinists and technicians who need a single-diameter cutter for short-run or prototype work. Buyers requiring a full drill set or multiple diameters will need additional items.
Sustained cutting behaviour
The 3X flute geometry supports steady chip evacuation when the drill runs at constant feed rates in steel or alloy. Continuous operation keeps the cutting edges engaged without the intermittent loading seen in peck cycles. The tool has no internal coolant passage, so flood or mist coolant must be supplied externally for deep holes.
Thermal and power profile
Solid carbide construction conducts heat away from the cutting zone into the shank and holder during normal use. Cutting forces at 4.50 mm diameter remain moderate, so spindle load and motor current stay within typical ranges for bench-top or CNC machines. No specific thrust or torque values are published.
Highlights
- Solid carbide construction resists wear for longer tool life
- 3X diameter drilling depth reaches deeper holes in one pass
- 50 mm diameter suits precise metric hole requirements
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 listed for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 4.50 mm Twister Xd 3X carbide drill generate during extended drilling cycles?
Solid carbide construction dissipates heat efficiently, reducing thermal buildup in the workpiece and extending tool life during continuous operation.
What shank size and tool holder does the 4.50 mm Twister Xd 3X drill require for secure clamping?
The drill features a standard cylindrical shank matching its 4.50 mm diameter, compatible with ER collets, Weldon flats or hydraulic chucks sized for 4.50 mm.
Will the 4.50 mm Twister Xd 3X drill fit the spindle and coolant setup of my older CNC machining centre?
Its common shank diameter and through-coolant capability allow direct use on legacy machines equipped with standard tool holders and internal coolant delivery.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
