M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 9.80 mm
A 9.80 mm coolant-fed drill for deep-hole drilling in automotive and tool applications
- Twister Xd design delivers efficient coolant-fed drilling for 9.80 mm holes
- 3X flute geometry improves chip evacuation during deep-hole operations
- M.A. Ford manufacturing ensures consistent performance in demanding applications
- Coolant-through capability reduces heat buildup for extended tool life
- California Proposition 65 compliance confirms regulated chemical disclosure for user safety
Product identity
The M.A. Ford Twister Xd is a coolant-fed drill with a 9.80 mm cutting diameter. It is designed for machinists who need through-tool coolant delivery during drilling operations. The tool carries the manufacturer part number 2XDCS3858A and is supplied new. California Proposition 65 warnings apply for cancer and reproductive harm.
Suitability
This drill suits workshops running coolant-fed spindles that can accommodate a 9.80 mm diameter. It is not for buyers who need a different cutting diameter or a non-coolant-fed shank. It is also not for operators whose machines lack through-spindle coolant capability. Hand-held drilling and dry cutting are outside its intended use.
Deciding specification
The 9.80 mm diameter is the single specification that decides fit. Verify the hole size required by your drawing or process before ordering. If the target diameter differs, select the matching variant instead. The coolant-fed design only works when the machine supplies coolant through the spindle.
Highlights
- Twister Xd design delivers efficient coolant-fed drilling for 9.80 mm holes
- 3X flute geometry improves chip evacuation during deep-hole operations
- M.A. Ford manufacturing ensures consistent performance in demanding applications
- Coolant-through capability reduces heat buildup for extended tool life
- California Proposition 65 compliance confirms regulated chemical disclosure for user safety
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 9.80 mm coolant-fed drill generate during continuous operation?
Coolant flow through the drill body carries heat away from the cutting zone, keeping the tool at a stable temperature during extended drilling cycles.
What machine setup is required to use the coolant-fed drill?
A spindle with through-coolant capability and a 9.80 mm tool holder are needed to supply cutting fluid through the drill.
Will the 3X flute design work with older CNC controllers that lack high-speed interpolation?
The three-flute geometry reduces cutting forces, allowing reliable performance on machines with standard interpolation rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
