M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 7.80mm
Coolant-fed drill with 3X flute design bores 7.80 mm holes efficiently
- Coolant-fed design clears chips for deeper holes
- 80 mm diameter matches precise drilling needs
- 3X flute geometry improves material removal rate
- Twister Xd construction resists wear in tough alloys
- New condition delivers full factory performance
M.A. Ford Twister Xd 7.80mm Drill
The M.A. Ford Twister Xd is a coolant-fed drill manufactured to a 7.80mm diameter. It is built for machining operations that require through-tool coolant delivery. The 3X designation indicates the flute length relative to the diameter. This cutting tool arrives in new condition.
Who this suits and who should look elsewhere
Machinists drilling holes at 7.80mm with internal coolant supply will find the geometry matches that need. The design supports chip evacuation where flood coolant cannot reach the cutting zone. Buyers who need a different diameter, a non-coolant style, or a longer reach should select another tool.
Build fit: holder, coolant, and clearance
The straight shank fits standard drill holders and collets sized for this shank diameter. A machine with through-spindle coolant or a coolant-fed holder is required to use the internal channels. The 3X flute length frees axial space compared with longer drills while still reaching typical production depths.
Highlights
- Coolant-fed design clears chips for deeper holes
- 80 mm diameter matches precise drilling needs
- 3X flute geometry improves material removal rate
- Twister Xd construction resists wear in tough alloys
- New condition delivers full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill chuck size do I need to hold the 7.80 mm shank?
A chuck that opens to at least 7.80 mm is required to grip the drill securely.
Can I run this coolant-fed drill on a machine without through-spindle coolant?
No — the tool is designed for through-spindle coolant delivery and will not receive cutting fluid on a standard machine.
How can I confirm the drill is cutting correctly after installation?
Check for steady chip evacuation through the flutes and a consistent hole diameter of 7.80 mm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
