M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 7.20mm
A 7.20 mm coolant-fed drill with Twister Xd 3X geometry for high-performance drilling applications
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability handles deeper holes in one pass
- Precision 7.20 mm diameter suits exacting hole requirements
- M.A. Ford manufacturing delivers reliable cutting performance
- California Proposition 65 notice informs safe handling practices
Product identity
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a new cutting tool designed for precision drilling in professional workshops and industrial environments. Its 7.20 mm diameter suits applications that require this exact hole size.
Diameter specification
The 7.20 mm cutting diameter is the single dimension that determines whether this drill matches the required hole size. Verify the specification against your drawing before ordering to avoid mismatched tooling.
Operational characteristics
Coolant-fed operation directs lubricant through the tool to the cutting zone, reducing heat buildup and extending edge life during sustained use. The design supports consistent chip evacuation and lower cutting forces in normal drilling cycles.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability handles deeper holes in one pass
- Precision 7.20 mm diameter suits exacting hole requirements
- M.A. Ford manufacturing delivers reliable cutting performance
- California Proposition 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 7.20 mm drill diameter mean for hole size in a real machine?
The 7.20 mm diameter produces a finished hole of that size when the drill is run at recommended speeds and feeds.
How does the coolant-fed design affect the drilling standard and what does it cap in practice?
Internal coolant delivery through the 2XDCS2835A body allows higher cutting speeds and deeper holes by controlling heat and clearing chips.
What shank dimensions are needed to fit or mount this 7.20 mm Twister Xd drill?
The drill uses a standard cylindrical shank sized for 7.20 mm tool holders; match the holder bore to the shank for secure clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
