M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 7.00 mm
A 7.00 mm coolant-fed drill designed for three-times-diameter drilling depth
- Twister XD 3X design enables efficient coolant delivery
- 00 mm diameter suits precise drilling applications
- M.A. Ford brand delivers professional-grade tool reliability
- Coolant-fed operation reduces heat buildup during use
- California Proposition 65 warning indicates chemical presence
7.00 mm Coolant-Fed Drill
The M.A. Ford Twister XD 3X is a solid-carbide drill with internal coolant channels, designed for production drilling in steel, stainless steel and high-temperature alloys. Its 7.00 mm diameter and 3× diameter flute length suit CNC machines and rigid manual set-ups that can deliver through-spindle coolant.
Who it suits and who it does not
Shops running high-volume holes in tough metals will benefit from the coolant-fed design that evacuates chips and controls heat. Buyers without through-coolant capability, or who only drill occasional holes in soft materials, should look at a conventional twist drill instead.
7.00 mm diameter
The 7.00 mm cutting diameter is the single specification that determines fit; the hole you need to produce must match this size exactly. The 2XDCS2756A part number confirms the 3× length and coolant-fed geometry for your tooling records.
Highlights
- Twister XD 3X design enables efficient coolant delivery
- 00 mm diameter suits precise drilling applications
- M.A. Ford brand delivers professional-grade tool reliability
- Coolant-fed operation reduces heat buildup during use
- California Proposition 65 warning indicates chemical presence
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the Twister XD 3X coolant-fed drill generate much heat when running continuously?
The drill uses internal coolant delivery to carry heat away from the cutting zone, keeping the 7.00 mm bit cooler during extended drilling cycles.
What machine setup is required before the Twister XD 3X 7.00 mm drill can be used?
A CNC or milling spindle with through-coolant capability and a 7.00 mm tool holder is needed to supply coolant through the drill body.
Will the 7.00 mm Twister XD 3X fit in an older tool holder that only accepts standard shanks?
The drill shank matches the 2XDCS2756A specification; verify your holder accepts this shank style before installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
