M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 5.70mm
A 5.70 mm coolant-fed drill bit designed for efficient chip evacuation and extended tool life
- Twister Xd design optimised for 3× diameter drilling depth
- 70 mm diameter suits precise hole-making tasks
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures consistent cutting performance
- California Proposition 65 warning indicates regulated substance presence
Precision Drilling Tool
The M.A. Ford Twister Xd 3X is a coolant-fed drill bit designed for precision hole-making in demanding materials. Its 5.70mm diameter suits applications requiring accurate sizing and effective chip evacuation through internal coolant delivery.
Upgrade from Standard Bits
This drill replaces conventional twist drills where heat buildup and chip packing reduce tool life or hole quality. The jump is justified when internal coolant flow is available and consistent performance at depth is required.
Suited for CNC Operations
Machinists running CNC equipment with through-spindle coolant capability will benefit from the design. Shops without coolant-fed spindles or those needing different diameters should select alternative tooling.
Highlights
- Twister Xd design optimised for 3× diameter drilling depth
- 70 mm diameter suits precise hole-making tasks
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures consistent cutting performance
- California Proposition 65 warning indicates regulated substance presence
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 5.70 mm Twister Xd drill require for a secure fit?
The drill has a 5.70 mm cutting diameter and a matching 5.70 mm shank, so it fits a standard 5.70 mm collet or drill chuck without a sleeve.
How do you connect coolant to the 2XDCS2244A drill, and which step is often missed?
Feed coolant through the machine spindle into the drill's axial hole; the step often missed is verifying the spindle seal is rated for the pressure used.
When should the 5.70 mm Twister Xd drill be replaced or resharpened?
Replace or resharpen when the cutting lips show visible wear, chipping, or when hole diameter exceeds tolerance, typically after the tool life recommended for the workpiece material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
