M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 5.50mm
Coolant-fed drill bit with 5.50 mm diameter for efficient chip evacuation
- Precise 5.50 mm holes for accurate fits
- Three-times-diameter reach handles deep drilling tasks
- Internal coolant feed clears chips and reduces heat
- M.A. Ford engineering delivers reliable cutting performance
- New condition ensures full tool life from start
Drill Purpose & Users
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a 5.50 mm cutting tool designed for precision holemaking in metalworking applications. It serves machinists and fabricators who require accurate, repeatable results in production or maintenance environments. The coolant-fed design supports efficient chip evacuation and extended tool life. Buyers needing larger diameters or non-coolant drills should select a different model.
Sustained-Load Behaviour
Under continuous cutting the drill maintains stable performance thanks to its internal coolant channels that deliver fluid directly to the cutting edges. This flow reduces heat buildup at the tip and flushes chips away from the flutes, preventing packing that can cause premature wear or breakage. The 3X geometry further promotes consistent material removal rates during long cycles.
Thermals, Noise & Power
Coolant delivery manages thermal load at the cutting zone, keeping the workpiece and tool within acceptable temperature ranges during normal operation. The drill itself produces no noise; sound levels depend entirely on the machine spindle and workpiece setup. Power consumption is determined by the host machine’s drive system and the specific cutting parameters chosen.
Highlights
- Precise 5.50 mm holes for accurate fits
- Three-times-diameter reach handles deep drilling tasks
- Internal coolant feed clears chips and reduces heat
- M.A. Ford engineering delivers reliable cutting performance
- New condition ensures full tool life from start
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat and vibration does the 5.50 mm Twister Xd 3X generate during extended drilling cycles?
The solid-carbide construction and through-coolant design keep the cutting zone cool and reduce vibration, so heat build-up stays low even in long production runs.
What toolholder and coolant system are required to run the 2XDCS2165A drill?
A standard hydraulic or shrink-fit holder that accepts a 5.50 mm shank plus a machine-tool coolant supply capable of delivering pressure through the spindle are needed.
Will the Twister Xd 3X fit the spindle and tool changer of an older CNC machining centre?
Yes — the 5.50 mm shank matches common ER collet and shrink-fit interfaces, so it installs directly on legacy machines without adapter sleeves.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
