M.A. Ford
M.A. Ford Twister XD 3X Coolant-Fed Drill 5.40 mm 2126
A 5.40 mm coolant-fed drill delivers lubrication directly to the cutting zone for deeper, cleaner holes
- 3× coolant-fed design clears chips efficiently at 5.40 mm
- Twister XD geometry improves hole accuracy in tough materials
- M.A. Ford manufacturing ensures consistent cutting performance
- California Prop 65 warning discloses regulated chemical content
- Model 2126 identifies this specific drill variant
Twister XD 3X Coolant-Fed Drill
The M.A. Ford Twister XD 3X is a coolant-fed drill built for production drilling where chip evacuation and tool life are critical. It suits CNC operators and machinists who need reliable performance in steel, stainless and high-temperature alloys. The through-coolant design delivers lubricant directly to the cutting zone. This reduces heat buildup and improves hole quality in deep-hole applications.
5.40 mm diameter and 3X depth capacity
The 5.40 mm cutting diameter handles medium-sized holes with consistent accuracy. The 3X diameter depth rating provides enough reach for common through-holes and blind holes without pecking cycles. Beyond this depth range, chip packing becomes a risk and cycle times increase. The coolant-fed flutes extend practical depth compared to non-coolant drills of the same length.
Coolant-fed shank fits standard toolholders
The drill uses a standard shank that fits common ER collets, Weldon flats or hydraulic holders. No proprietary adapter is required, so it drops into existing tool assemblies. Internal coolant passages require a machine with through-spindle or flood-coolant capability. The design frees up programming time by reducing the need for frequent retracts.
Highlights
- 3× coolant-fed design clears chips efficiently at 5.40 mm
- Twister XD geometry improves hole accuracy in tough materials
- M.A. Ford manufacturing ensures consistent cutting performance
- California Prop 65 warning discloses regulated chemical content
- Model 2126 identifies this specific drill variant
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 5.40 mm Twister XD 3X coolant-fed drill work with my existing 6 mm drill chuck?
A 5.40 mm shank fits standard 6 mm chucks without an adapter; the coolant-fed design simply requires a compatible coolant supply on the machine.
How can I verify the 2126 drill is cutting correctly once installed?
Consistent chip evacuation through the coolant holes, steady spindle load and a clean 5.40 mm hole diameter indicate proper operation.
Does the 2126 come with coolant fittings or only the drill body?
Only the Twister XD 3X drill body is included; coolant fittings, supply lines and holders must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
