M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 5/32
A 5/32 inch coolant-fed drill designed for three-times diameter drilling depth
- Coolant-fed design clears chips efficiently for smoother drilling
- 3X diameter reach handles deeper holes in a single pass
- Twister Xd geometry reduces cutting forces for longer tool life
- 5/32 inch diameter suits precise metalworking applications
- California Prop 65 warning informs safe handling practices
M.A. Ford Twister Xd 3X Drill
The M.A. Ford Twister Xd 3X is a coolant-fed drill bit sized at 5/32 inch for precision hole-making. It is built for machinists and maintenance technicians who need reliable performance in metalworking applications. The design supports efficient chip evacuation through internal coolant delivery. This tool suits professional workshops and production environments.
Suited for coolant-fed drilling
This drill suits operators with machines equipped for through-tool coolant supply who need a 5/32 inch cutting diameter. It is not for buyers who lack coolant-fed spindle capability or who require a different hole size. The tool does not fit standard non-coolant drill holders. Shops without high-pressure coolant systems should look at alternative drilling solutions.
5/32 inch coolant-fed specification
The decisive specification is the 5/32 inch diameter combined with the 3X coolant-fed design for targeted fluid delivery. This exact size and feed configuration determines compatibility with your workpiece and machine setup. Verify the required diameter and coolant capability before purchase. The item ships directly from the manufacturer.
Highlights
- Coolant-fed design clears chips efficiently for smoother drilling
- 3X diameter reach handles deeper holes in a single pass
- Twister Xd geometry reduces cutting forces for longer tool life
- 5/32 inch diameter suits precise metalworking applications
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 2XDCS1562A Twister Xd drill and what step is often missed?
Mount the 5/32 drill in a rigid holder, align the through-tool coolant port with the machine supply, and verify coolant flow before cutting; the step most often missed is confirming pressure at the tip rather than at the pump.
What maintenance or replacement will the 2XDCS1562A Twister Xd drill need later?
Inspect the 5/32 cutting edges after each job; replace the drill when the margins show wear or when the coolant hole becomes restricted by residue.
What limit appears first on the 2XDCS1562A Twister Xd drill during sustained use?
The 3X diameter flute length fills with chips first; once the 5/32 flutes pack, coolant cannot evacuate them and the drill must be retracted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
