M.A. Ford
M.A. Ford Twister XD 3X Coolant Fed Drill 31/64
A 31/64 inch coolant-fed drill delivers efficient chip evacuation for deep-hole drilling applications
- Precision drilling with 31/64 inch diameter
- Coolant-fed design improves chip evacuation and tool life
- Twister XD geometry enhances hole quality in tough materials
- 3X flute configuration supports faster feed rates
- California Proposition 65 compliance ensures regulated safety disclosure
Twister XD 3X Coolant-Fed Drill
The M.A. Ford Twister XD 3X is a coolant-fed drill built for high-performance drilling in demanding applications. Its design delivers coolant directly to the cutting zone for extended tool life and consistent hole quality. This new cutting tool targets professional machinists and manufacturing operations requiring reliable deep-hole performance.
Suited for high-volume production drilling
This drill suits shops running high-volume production where coolant-through capability reduces cycle times and improves chip evacuation. It is not for buyers who need a standard twist drill without internal coolant channels, or for occasional maintenance tasks where flood coolant is sufficient. Operations without through-spindle coolant systems should look at alternative tooling.
31/64 inch diameter defines the hole size
The 31/64 inch diameter is the single specification that determines fit for your application. This exact size matches specific bolt clearance or tap drill requirements in inch-based engineering drawings. Verify the required hole diameter against your print before ordering, as no other sizes are covered by this listing.
Highlights
- Precision drilling with 31/64 inch diameter
- Coolant-fed design improves chip evacuation and tool life
- Twister XD geometry enhances hole quality in tough materials
- 3X flute configuration supports faster feed rates
- California Proposition 65 compliance ensures regulated safety disclosure
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 31/64 drill need to fit the holder?
The 31/64 drill uses a standard straight shank that matches a 31/64 collet or chuck; verify the holder accepts that exact fractional size before mounting.
How is the coolant fed through the Twister XD and what step is often missed?
Coolant travels through internal channels to the tip; the step often missed is confirming the machine’s coolant pressure and flow rate match the drill’s through-tool design.
When should the 31/64 Twister XD drill be replaced?
Replace the drill when flank wear reaches the manufacturer’s limit, when hole diameter exceeds tolerance, or when the coolant holes become blocked and cannot be cleared.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
