M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 3.40 mm
Coolant-fed drill bit with 3.40 mm diameter for efficient chip evacuation
- Coolant-fed design clears chips efficiently for deeper holes
- 3X diameter capability reduces tool changes in production
- 40 mm diameter suits precise drilling applications
- M.A. Ford Twister XD series built for high-performance drilling
- California Proposition 65 warning indicates regulated chemical content
Industrial Coolant-Fed Drill
The M.A. Ford Twister Xd 3X is a 3.40 mm coolant-fed drill designed for high-efficiency metal cutting in production environments. It targets machinists and maintenance teams who need reliable chip evacuation and extended tool life during deep-hole operations. The through-coolant design supports consistent performance in steel and alloy workpieces.
Thermal Management in Cutting
Internal coolant delivery directs fluid to the cutting zone, reducing heat buildup at the drill point and along the flutes. This thermal control minimises thermal expansion and helps maintain hole accuracy during continuous drilling cycles. Lower cutting temperatures also reduce the risk of workpiece distortion in heat-sensitive alloys.
California Proposition 65 Compliance
The product carries a California Proposition 65 warning for exposure to chemicals known to cause cancer and reproductive harm. Users must follow workplace safety regulations, including proper ventilation, personal protective equipment and coolant handling procedures. No additional accessories or software are bundled with the drill.
Highlights
- Coolant-fed design clears chips efficiently for deeper holes
- 3X diameter capability reduces tool changes in production
- 40 mm diameter suits precise drilling applications
- M.A. Ford Twister XD series built for high-performance drilling
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the M.A. Ford Twister Xd 3X Coolant Fed Drill 3.40 mm and what step is often missed?
Secure the 3.40 mm drill in a rigid holder, align the coolant port with the machine feed, and verify flow before starting; the step often missed is confirming coolant reaches the tip at full pressure.
What maintenance or replacement will this drill need later?
Inspect the cutting edges after each job; replace the drill when the 3.40 mm diameter wears beyond tolerance or when coolant holes show blockage that cannot be cleared.
What limit appears first during sustained use of this coolant-fed drill?
The 3.40 mm flute length governs chip evacuation; under continuous drilling the limit reached first is chip packing in deep holes, which cuts coolant flow and raises edge temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
