M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 15.70Mm
Coolant-fed drill bit for 15.70 mm holes with three-times diameter depth capability
- Coolant-fed design improves chip evacuation during deep drilling
- 3X diameter capability reduces tool changes on long holes
- 70 mm diameter suits precise automotive applications
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 warning informs safe handling practices
Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a precision cutting tool designed for machining operations that require internal coolant delivery. It targets professional machinists and fabrication shops working with metals where chip evacuation and heat control are critical. The 15.70 mm diameter suits specific hole-making requirements in production environments.
Coolant Fed Design and 3X Geometry
The coolant fed design channels cutting fluid directly to the drill point, improving chip removal and reducing thermal buildup during deep hole drilling. The Twister Xd 3X geometry enhances stability and cutting efficiency compared to standard drills. These features combine to extend tool life and maintain hole accuracy in demanding materials.
15.70 mm Diameter Capacity
The 15.70 mm cutting diameter handles medium-sized hole applications in steel, cast iron and similar alloys. The 3X length-to-diameter ratio provides moderate reach for through holes and blind holes up to three diameters deep. It is not suited for micro drilling or large diameter roughing operations beyond its specified size.
Highlights
- Coolant-fed design improves chip evacuation during deep drilling
- 3X diameter capability reduces tool changes on long holes
- 70 mm diameter suits precise automotive applications
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 15.70 mm coolant-fed drill need resharpening, and can the 3X flute design be restored?
The Twister Xd 3X drill can be resharpened; its 3X flute geometry is designed for regrinding, and coolant-fed operation reduces wear, extending intervals between sharpening services.
What limits continuous drilling depth with the 15.70 mm Twister Xd 3X?
The 3X diameter flute length sets the maximum continuous drilling depth; chip evacuation and coolant flow remain effective up to that limit, beyond which peck cycles are recommended.
How much heat and noise does the 15.70 mm coolant-fed drill generate during all-day CNC runs?
Internal coolant delivery keeps the cutting zone cool, lowering thermal load on the spindle, while the 3X flute design runs quieter than standard drills at equivalent feed rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
