M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 15/64
Coolant-fed drill bit creates 15/64 inch holes with internal lubrication for deeper cuts
- 3X coolant-fed design clears chips efficiently
- 15/64 inch diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford quality ensures reliable operation
- California Proposition 65 compliance disclosed for safety awareness
Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd 3X is a coolant-fed drill bit sized at 15/64 inch. It is built for machining operations that require internal coolant delivery to the cutting zone. This tool suits professionals running CNC equipment or rigid setups where chip evacuation and heat control are critical. It is not for handheld drilling or machines without through-spindle coolant capability.
Build quality and shank fit
The Twister Xd 3X carries the 2XDCS2344A designation and ships direct from M.A. Ford in new condition. Its shank matches standard toolholder interfaces for coolant-through use, so it locks securely in compatible collets or holders. The construction supports high-pressure coolant flow without leakage. California Proposition 65 warnings apply because the product contains listed chemicals.
Practical limits of coolant-fed drilling
Effective use depends on machine spindle coolant pressure and filtration matching the drill's internal passages. Insufficient pressure or contaminated fluid will reduce chip evacuation and tool life. The 3X geometry targets specific depth-to-diameter ratios; deeper holes need peck cycles or specialised cycles. Buyers without coolant-through spindles cannot use this drill as intended.
Highlights
- 3X coolant-fed design clears chips efficiently
- 15/64 inch diameter suits precise drilling tasks
- Twister Xd geometry enhances cutting performance
- M.A. Ford quality ensures reliable operation
- California Proposition 65 compliance disclosed for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is the coolant-fed capability of the Twister Xd 3X drill?
The Twister Xd 3X is a coolant-fed drill designed to deliver coolant directly to the cutting zone for improved chip evacuation and tool life.
What are the physical dimensions of the 15/64 inch Twister Xd drill?
This drill has a 15/64 inch diameter and a 3X diameter flute length for deeper drilling applications.
How is the 2XDCS2344A drill installed in a tool holder?
Secure the cylindrical shank in a compatible drill chuck or collet, ensuring the coolant port aligns with the machine's supply line before tightening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
