M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 1250A 1/8
Coolant-fed drill bit designed for three-times-diameter depth, 1/8 inch size
- Coolant-fed design improves chip evacuation during drilling
- Twister Xd geometry enhances cutting performance in metal
- 1/8 inch diameter suits precision hole-making tasks
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
Twister Xd 3X Coolant Fed Drill
The M.A. Ford Twister Xd 3X Coolant Fed Drill is a precision cutting tool designed for machining operations requiring internal coolant delivery. It suits professionals in metalworking and manufacturing who need reliable hole-making performance in a 1/8 size configuration.
California Proposition 65 Compliance
This product carries California Proposition 65 warnings for chemicals known to cause cancer and birth defects or other reproductive harm. Users should follow standard workshop safety practices including proper ventilation, personal protective equipment, and coolant handling procedures during operation.
Manufacturer Direct Supply
The drill ships directly from M.A. Ford, ensuring authentic product quality and direct manufacturer support. Buyers needing multiple sizes or complementary tooling should verify availability separately as this listing covers the 1250A 1/8 specification only.
Highlights
- Coolant-fed design improves chip evacuation during drilling
- Twister Xd geometry enhances cutting performance in metal
- 1/8 inch diameter suits precision hole-making tasks
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the coolant feed on the Twister Xd 3X drill?
Connect the coolant supply to the drill’s internal feed port, then verify flow before cutting; the step most people miss is purging air from the line so coolant reaches the tip from the first plunge.
What maintenance will the Twister Xd 3X drill need over time?
Inspect the coolant passages for blockage after each job, re-sharpen or replace the cutting edges when they dull, and check seals for wear to prevent leaks.
What limit appears first during sustained drilling with the 1250A?
Heat buildup at the cutting zone becomes the limiting factor; without adequate coolant flow the drill will overheat and lose edge life before any other component fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
