M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 12.80Mm
A coolant-fed drill with a 12.80 mm diameter for efficient metal drilling
- Coolant-fed design improves chip evacuation during deep drilling
- 3× diameter reach extends hole depth in a single pass
- 80 mm diameter suits precise metric hole requirements
- M.A. Ford brand delivers professional-grade cutting performance
- California Proposition 65 notice included for regulatory awareness
M.A. Ford Twister Xd 12.80 mm
This M.A. Ford Twister Xd drill is a coolant-fed cutting tool manufactured to a 12.80 mm diameter. It is built for machine-shop professionals who require through-coolant delivery during drilling operations. The design supports high-performance drilling in demanding production environments.
Suited for coolant-fed drilling setups
This drill suits operators with equipment that supplies coolant through the tool holder. It is not for users who rely on external flood coolant only, nor for hand-held drilling applications. Buyers needing a different diameter or a non-coolant-fed geometry should look at other options.
12.80 mm diameter defines fit
The 12.80 mm diameter is the critical specification that determines whether this tool matches the required hole size. Verify the diameter against your drawing or workpiece requirement before ordering. California Proposition 65 warnings apply to this product.
Highlights
- Coolant-fed design improves chip evacuation during deep drilling
- 3× diameter reach extends hole depth in a single pass
- 80 mm diameter suits precise metric hole requirements
- M.A. Ford brand delivers professional-grade cutting performance
- California Proposition 65 notice included for regulatory awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 12.80 mm coolant-fed drill generate during continuous use?
The through-coolant design channels fluid directly to the cutting zone, keeping the 12.80 mm drill cooler than non-coolant drills during extended drilling cycles.
What machine setup is required to run this 12.80 mm coolant-fed drill?
A CNC or milling machine with through-spindle coolant delivery and a holder that accepts the 12.80 mm shank is needed to supply coolant through the drill.
Will this 12.80 mm drill fit the collets and tool changers on my older machining centre?
The 12.80 mm shank diameter matches standard ER collets and tool-holder bores of that size, so it fits existing 12.80 mm tooling positions on older machines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
