M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 11/64
A 3x diameter coolant-fed drill bit sized 11/64 inch for powered drilling applications
- Coolant-fed design clears chips during deep drilling
- 3X diameter reach handles longer holes in one pass
- 11/64 inch size fits precise fractional applications
- Twister Xd geometry improves cutting stability
- California Proposition 65 warning discloses regulated chemicals
11/64 Twister Xd drill
The M.A. Ford Twister Xd is a coolant-fed drill bit sized at 11/64 inch. It is made for machine shops and maintenance teams that need precise holes in tough alloys. The 3X geometry supports deeper cuts without frequent pecking.
Coolant-fed 3X design
Internal coolant channels deliver fluid to the cutting zone, reducing heat and improving chip evacuation. This single feature determines whether the bit suits high-temperature materials or long production runs where external flood coolant cannot reach.
Depth capacity and limits
The 3X length handles holes up to three diameters deep in steel, stainless steel and cast iron. Beyond that range chip packing increases and tool life drops, so deeper holes need a longer series or a peck cycle.
Highlights
- Coolant-fed design clears chips during deep drilling
- 3X diameter reach handles longer holes in one pass
- 11/64 inch size fits precise fractional applications
- Twister Xd geometry improves cutting stability
- California Proposition 65 warning discloses regulated chemicals
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 11/64 size mean when the drill is in the machine?
The 11/64 inch diameter matches the hole the drill will cut in the workpiece.
What interface or standard governs the coolant-fed design?
The drill uses an internal coolant channel that feeds fluid directly to the cutting edges.
What does the drill need to fit in the spindle?
A standard drill chuck or collet that accepts an 11/64 inch shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
