M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 10.40mm 2XDCS4094A
Coolant-fed drill cuts 10.40 mm holes three times faster than standard drills
- Coolant-fed design clears chips efficiently during deep drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd 3X geometry enhances cutting performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 compliance ensures safety transparency
M.A. Ford Twister Xd 10.40mm Drill
This M.A. Ford Twister Xd drill is a 10.40mm coolant-fed cutting tool designed for professional machining operations. It targets machine-shop operators and maintenance engineers who need precise hole-making with internal coolant delivery. The 3X geometry supports efficient chip evacuation in deeper drilling applications.
Suited for coolant-fed machines only
This drill suits workshops running CNC machines or lathes equipped with through-spindle coolant systems. It is not for hand-held drilling or machines lacking internal coolant supply. Buyers who need a standard twist drill without coolant channels should look at a different tool type.
10.40mm diameter decides fit
The single specification that decides whether this is the right part is the 10.40mm cutting diameter. Your hole size requirement must match this exact figure. Verify the required hole diameter against your drawing before ordering this drill.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd 3X geometry enhances cutting performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 compliance ensures safety transparency
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 10.40mm Twister Xd drill and what step is often missed?
Secure the drill in a rigid holder, engage the coolant feed, and verify the 3X flute geometry clears chips before starting the cut.
What maintenance will the 2XDCS4094A drill need over time?
Inspect the cutting edges for wear after each job, clean coolant passages to prevent blockage, and replace the drill when edge rounding exceeds tolerance.
What limit appears first during sustained drilling with this 10.40mm tool?
Chip evacuation capacity in the 3X flute design becomes the limiting factor before thermal buildup in the coolant-fed body.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
