M.A. Ford
M.A. Ford Twister Xd 3X Coolant Fed Drill 10.30mm
A 10.30 mm coolant-fed drill designed for efficient chip evacuation during deep-hole drilling
- 3X coolant-fed design clears chips efficiently
- 30 mm diameter suits precise hole-making
- M.A. Ford construction delivers reliable cutting performance
- Twister Xd geometry reduces thrust and heat
- California Proposition 65 warning informs safe handling
10.30 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 3X is a solid-carbide drill with internal coolant channels. It is manufactured for production drilling where consistent chip evacuation and hole quality are critical. The 10.30 mm cutting diameter suits metric fastener preparation and precision boring tasks. This tool targets machine shops and maintenance teams running CNC or high-rigidity manual equipment.
Suited for high-volume metric holes.
Shops drilling 10.30 mm holes in steel, cast iron or high-temperature alloys gain from through-coolant delivery and the 3× length-to-diameter ratio. The design requires a spindle with coolant-through capability and sufficient rigidity to maintain run-out. Operators without flood or through-spindle coolant, or those needing larger diameters, should evaluate alternative tooling.
10.30 mm cutting diameter
The single specification that determines fit is the 10.30 mm diameter. Verify the hole size against the drawing or fastener standard before ordering. The flute length and overall length follow the 3× proportion for this diameter. Confirm machine spindle interface and coolant pressure match the tool holder requirements.
Highlights
- 3X coolant-fed design clears chips efficiently
- 30 mm diameter suits precise hole-making
- M.A. Ford construction delivers reliable cutting performance
- Twister Xd geometry reduces thrust and heat
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 10.30 mm Twister Xd 3X drill in a single pass?
The 3X designation means it is designed to drill up to three times its diameter, so roughly 30 mm deep in one operation.
What shank standard does the 2XDCS4055A use for tool-holder fit?
It uses a standard cylindrical shank that matches the 10.30 mm body diameter, fitting common drill holders and collets for that size.
What machine-space clearance does the 10.30 mm coolant-fed drill need?
The drill body is 10.30 mm in diameter; allow enough spindle travel and holder length for the 3X flute length plus coolant-groove clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
