M.A. Ford
M.A. Ford Twister Micro-Tuff Drill 3.00 mm pneumatic accessory
3.00 mm Twister Micro-Tuff drill bit for precise pneumatic drilling tasks
- 00 mm drill diameter suits micro-precision tasks
- Twister Micro-Tuff geometry improves chip evacuation in small holes
- M.A. Ford manufacturing delivers consistent cutting performance
- New condition ensures full tool life from first use
- California Proposition 65 notice discloses regulated chemical content
3.00 mm Twister Micro-Tuff Drill
This new M.A. Ford Twister Micro-Tuff Drill is a 3.00 mm pneumatic accessory designed for precise drilling tasks in professional and workshop environments. It arrives as a single cutting tool ready for use with compatible power equipment. The product carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm. Buyers should review safety data before use.
Suited for precision drilling in metal
This drill suits machinists and technicians who need a 3.00 mm bit for accurate hole-making in ferrous or non-ferrous materials using pneumatic tools. It is not for operators requiring larger diameters, different shank styles, or bits made for wood, masonry or handheld rotary tools without pneumatic drive. Users needing coated or carbide-tipped variants should look at other product lines.
3.00 mm cutting diameter
The 3.00 mm diameter is the critical specification that determines whether this drill matches the required hole size and tool holder. Confirm the exact dimension against your drawing or machine setup before ordering. No other size or tolerance data is supplied.
Highlights
- 00 mm drill diameter suits micro-precision tasks
- Twister Micro-Tuff geometry improves chip evacuation in small holes
- M.A. Ford manufacturing delivers consistent cutting performance
- New condition ensures full tool life from first use
- California Proposition 65 notice discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 3.00 mm Twister Micro-Tuff Drill generate during continuous pneumatic use?
The drill is a solid-carbide cutting tool with no motor or electronics, so it produces only the frictional heat normal for a 3.00 mm drill bit in the material being cut.
What pneumatic tool or collet must I already own to run this 3.00 mm accessory?
You need a pneumatic drill or die grinder that accepts a 3.00 mm shank, plus a compatible collet or chuck and a compressed-air supply at the tool’s rated pressure.
Will the 305M0300AM drill fit in my older 3 mm keyless chuck without run-out?
The shank is ground to a nominal 3.00 mm diameter, matching standard 3 mm chucks; run-out will depend on the chuck’s own condition and clamping force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
