M.A. Ford
M.A. Ford Twister Coolant 10X Micro Drill 2.95 mm
A 2.95 mm micro drill with 10X coolant-through capability for precise deep-hole drilling
- 10X coolant-fed design clears chips efficiently
- 95 mm diameter suits precise micro-drilling tasks
- M.A. Ford engineering delivers reliable cutting performance
- Coolant-through capability reduces heat buildup during operation
- Twister geometry enhances stability in deep-hole applications
Precision Micro Drill for Coolant-Fed Operations
The M.A. Ford Twister Coolant 10X Micro Drill measures 2.95 mm in diameter and is built for high-precision drilling in metalworking applications. Its through-coolant design delivers fluid directly to the cutting zone for improved chip evacuation and tool life. Machinists running CNC centres with coolant capability will find it suited for deep, small-diameter holes.
Suited for CNC Machinists
This drill targets professionals who need accurate, repeatable results in tough materials using 10X diameter depth capability. It is not for operators limited to flood coolant or manual machines without through-spindle delivery. Buyers needing larger diameters or non-coolant tooling should look at other options.
2.95 mm Diameter Defines Hole Size
The 2.95 mm cutting diameter is the critical specification that determines if this drill matches the required hole tolerance and clearance. Verify this exact size against your engineering drawing or tap chart before ordering. No other dimension in the data overrides this primary fit criterion.
Highlights
- 10X coolant-fed design clears chips efficiently
- 95 mm diameter suits precise micro-drilling tasks
- M.A. Ford engineering delivers reliable cutting performance
- Coolant-through capability reduces heat buildup during operation
- Twister geometry enhances stability in deep-hole applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the Twister Coolant 10X micro drill run hot or noisy during continuous use?
The micro drill is a solid cutting tool without moving parts, so it produces no operational noise and generates heat only through normal friction in the cut.
What equipment must I already have to use this 2.95 mm micro drill?
You need a CNC machine or precision spindle that accepts a 2.95 mm shank and can deliver through-spindle coolant at the pressure the 10X design requires.
Will this micro drill work reliably in an older machining centre?
Yes, provided the older centre can hold the 2.95 mm shank securely and supply coolant through the spindle, the drill will perform as designed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
