M.A. Ford
M.A. Ford Twister Coolant 10X Micro Drill 2.65 mm
A 2.65 mm micro drill with 10× coolant-through capability for deep-hole precision
- 10x coolant-through design clears chips from deep holes
- 65 mm diameter suits fine-feature drilling
- M.A. Ford manufacturing ensures consistent geometry
- Twister flute profile reduces cutting forces
- California Proposition 65 warning lists cancer and reproductive risks
Precision Micro Drill for Deep-Hole Work
The M.A. Ford Twister Coolant 10X Micro Drill has a 2.65 mm diameter and a 10X length-to-diameter ratio. It targets machinists producing small, deep holes in metal components. The through-coolant design delivers fluid directly to the cutting zone for chip evacuation and temperature control.
Solid Carbide Construction
The solid carbide body resists deflection during extended reach cuts. Internal coolant passages exit near the cutting edges to flush chips from deep holes and reduce thermal buildup. This layout supports consistent hole straightness and surface finish in tough alloys.
Replaces Standard Jobber Drills When Depth Exceeds
The 10X reach eliminates the need for peck-drilling cycles in many applications, cutting cycle time. The jump is worth it when hole depth approaches ten times the diameter and chip packing becomes an issue. California Proposition 65 warnings apply to this product.
Highlights
- 10x coolant-through design clears chips from deep holes
- 65 mm diameter suits fine-feature drilling
- M.A. Ford manufacturing ensures consistent geometry
- Twister flute profile reduces cutting forces
- California Proposition 65 warning lists cancer and reproductive risks
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 10X designation mean for the Twister Coolant micro drill?
The 10X indicates a 10 times diameter drilling depth capability for this micro drill.
What size collet or chuck is needed to hold the 2.65 mm shank?
A precision collet or chuck that accepts a 2.65 mm shank is required to hold this micro drill.
How is the Twister Coolant micro drill installed in a machine spindle?
Insert the 2.65 mm shank fully into the collet, tighten securely, and verify coolant flow through the internal channels before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
