M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 7/32 in
Three-flute drill designed for aluminium cuts 7/32 inch holes efficiently
- Optimised for aluminium with 3 flute geometry
- Five times faster drilling speed boosts productivity
- Proprietary Twister Al coating reduces built-up edge
- 7/32 inch diameter suits precise hole requirements
- California Proposition 65 warning ensures safety awareness
M.A. Ford Twister Al 5X Drill
The M.A. Ford Twister Al 5X is a 3-flute drill bit sized at 7/32 in. It is built for machinists and fabricators who need a dedicated tool for aluminium and similar non-ferrous alloys. The flute geometry targets efficient chip evacuation in softer metals.
Upgrading from general-purpose bits
Standard twist drills often load up with aluminium chips and wander on entry. This 3-flute design reduces that tendency and produces a cleaner hole finish in a single pass. The jump is worth it when hole quality and tool life in non-ferrous work outweigh the cost of a specialist cutter.
Practical limits of the 3-flute geometry
The fixed 7/32 in diameter means the tool covers one hole size only; a different diameter requires a separate bit. The three flutes limit chip space compared with two-flute drills, so very deep holes in gummy aluminium may still need peck cycles. California Proposition 65 warnings apply to this product.
Highlights
- Optimised for aluminium with 3 flute geometry
- Five times faster drilling speed boosts productivity
- Proprietary Twister Al coating reduces built-up edge
- 7/32 inch diameter suits precise hole requirements
- California Proposition 65 warning ensures safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 7/32 in Twister Al 5X drill need to fit my chuck?
The drill has a 7/32 inch diameter shank, so it fits any standard chuck that accepts that size.
How do I install the Twister Al 5X 3 flute drill without snapping the flutes?
Clamp the workpiece securely, start the hole at low speed with steady pressure, and avoid side-loading the three flutes during entry.
When should I replace the 22921870 drill bit?
Replace it when the cutting edges show visible wear, chipping, or when drilling force increases noticeably in aluminium.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
