M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 7/16 22943750
High-performance 7/16 inch three-flute drill designed for efficient aluminum drilling
- Designed for aluminium with Twister Al 5X geometry
- Three-flute design improves chip evacuation in soft metals
- 7/16 inch diameter suits common automotive fasteners
- Manufactured by M.A. Ford for professional power-tool use
- New condition ensures full factory performance from first hole
M.A. Ford Twister Al 5X Drill
The M.A. Ford Twister Al 5X is a 3-flute drill manufactured for high-performance drilling tasks. It carries the manufacturer part number 22943750 and is supplied in new condition. The tool is produced by M.A. Ford, a recognised name in cutting-tool engineering.
Machinists working with aluminium alloys
This drill suits machinists who need a dedicated geometry for aluminium and similar non-ferrous materials. The three-flute design supports efficient chip evacuation in those alloys. It is not intended for general-purpose steel drilling, hardened materials or applications requiring a coolant-through capability.
7/16 inch cutting diameter
The cutting diameter is 7/16 inch, which determines the hole size this tool will produce. Verify that your operation calls for this exact diameter before ordering. The product carries a California Proposition 65 warning for chemicals known to cause cancer and birth defects or other reproductive harm.
Highlights
- Designed for aluminium with Twister Al 5X geometry
- Three-flute design improves chip evacuation in soft metals
- 7/16 inch diameter suits common automotive fasteners
- Manufactured by M.A. Ford for professional power-tool use
- New condition ensures full factory performance from first hole
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size drill chuck is needed for the 7/16 inch shank on the M.A. Ford Twister Al 5X?
A chuck that opens to at least 7/16 inch is required to hold the shank securely.
Can the 3-flute design of the 22943750 drill be used in a standard handheld drill motor?
Yes, the 3-flute geometry works in standard handheld drill motors for aluminium cutting.
How do I confirm the Twister Al 5X drill is cutting correctly after setup?
Check for consistent chip formation and a smooth hole finish without excessive heat buildup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
