M.A. Ford
M.A. Ford Twister Al 5X 3 Flute Drill 27/64 22942190
Three-flute drill bit with 27/64 inch diameter for aluminium machining
- Drills 5× diameter deep with three-flute chip evacuation
- 27/64 inch diameter suits precise hole sizing
- New M.A. Ford tool delivers reliable cutting performance
- Prop 65 notice informs safe handling practices
- Manufacturer-direct supply ensures authentic quality control
Twister Al 5X 3 Flute Drill 27/64
The M.A. Ford Twister Al 5X 3 Flute Drill in 27/64 size is built for drilling aluminium and similar non-ferrous materials. Its five-times-diameter flute length supports deep-hole work in a single pass. The three-flute geometry promotes chip evacuation and hole accuracy in production environments.
Three-flute design and 5X reach
The three-flute construction balances cutting stability with efficient chip removal, reducing the risk of binding in deep holes. A 5X diameter flute length means fewer peck cycles and faster cycle times on CNC machines or rigid manual setups. The 27/64 diameter suits specific clearance or tap-drill requirements.
Upgrading from standard two-flute jobbers
Shops moving up from conventional two-flute jobber drills gain deeper reach and smoother finishes in aluminium without changing toolholders. The step is worthwhile when hole depth exceeds three diameters or when chip packing slows current operations. Buyers needing coolant-through capability or specialised coatings for abrasive alloys should look elsewhere.
Highlights
- Drills 5× diameter deep with three-flute chip evacuation
- 27/64 inch diameter suits precise hole sizing
- New M.A. Ford tool delivers reliable cutting performance
- Prop 65 notice informs safe handling practices
- Manufacturer-direct supply ensures authentic quality control
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill-point standard does the Twister Al 5X 22942190 use and what material limit does it target?
The Twister Al 5X 22942190 follows a 3-flute geometry designed for aluminium alloys, giving faster chip evacuation and reduced walk in non-ferrous metals.
What shank size and flute length does the 27/64 drill require for a secure chuck grip?
The 27/64 diameter shank fits standard 3-jaw chucks; the 5X flute length provides deeper reach without extending beyond typical drill-press capacity.
How is the 22942190 installed in a CNC tool changer and which orientation step is often missed?
Load the drill with the shank fully seated and the flute-start line facing the coolant port; operators often forget to align that line, causing uneven wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
