M.A. Ford
M.A. Ford Tuffcut GP 4 Flute Ball Nose End Mill 14.0 mm 14055120
A 14.0 mm four-flute ball nose end mill for contouring and finishing operations
- Four-flute design gives smoother finish in profiling cuts
- 0 mm diameter suits medium-size pocketing operations
- Ball nose geometry creates contoured surfaces and fillets
- M.A. Ford TuffCut GP series built for general-purpose milling
- California Proposition 65 warning indicates regulated substances present
14.0 mm ball-nose end mill
The M.A. Ford Tuffcut GP 14055120 is a four-flute carbide end mill with a 14.0 mm cutting diameter and a ball-nose profile. It is designed for contouring, profiling and finishing operations in a range of ferrous and non-ferrous materials. The tool suits CNC machinists and job-shop operators who need reliable geometry for 3D surfacing work.
Four-flute geometry limits chip space
Four flutes increase core strength and surface finish quality but reduce chip evacuation capacity compared with two- or three-flute designs. Deep pockets or high material-removal rates in sticky alloys can cause chip packing if coolant pressure or feed rates are not adjusted. Rigid machine spindles and stable workholding are required to prevent vibration at full engagement.
Replaces general-purpose two-flute ball mills
Shops moving from two-flute ball-nose cutters to this four-flute tool gain longer edge life and finer finishes on contoured parts. The upgrade is worthwhile when cycle time matters and the machine can maintain consistent feed without deflection. It is not suited for heavy roughing where large chip gullets are essential.
Highlights
- Four-flute design gives smoother finish in profiling cuts
- 0 mm diameter suits medium-size pocketing operations
- Ball nose geometry creates contoured surfaces and fillets
- M.A. Ford TuffCut GP series built for general-purpose milling
- California Proposition 65 warning indicates regulated substances present
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I choose the 14.0 mm ball nose or a different diameter for my job?
The 14.0 mm diameter suits medium to large radius profiling and contouring in steel, stainless and non-ferrous alloys. Pick a smaller size for tighter internal corners or a larger one for faster stock removal on open surfaces.
What does the four-flute ball nose geometry deliver in a CNC milling operation?
Four flutes give a finer finish and higher feed rates than two-flute tools when side-milling or profiling. The ball nose creates smooth 3-D contours and fillets without leaving a flat bottom, reducing secondary finishing passes.
How does the 14055120 tool interface with standard ER or Weldon holders?
The straight shank fits directly into ER collets, Weldon flats or shrink-fit holders sized for 14.0 mm, providing rigid clamping for high-speed roughing and finishing without a proprietary adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
