M.A. Ford
M.A. Ford Tuffcut DM 156M0200N35A 2.0 mm ball nose end mill
Two-flute ball nose end mill with a 2.0 mm necked cutting diameter for precision profiling
- TypeCutting Tools
- 2-flute ball nose for smooth contour cuts
- 0 mm diameter suits fine-detail milling
- Necked shank clears deep pockets without interference
- TuffCut DM coating resists wear in abrasive materials
- California Prop 65 notice included for safety compliance
Precision cutting tool
The M.A. Ford Tuffcut DM 156M0200N35A is a 2.0 mm ball nose end mill with a necked design and two flutes. It is manufactured new for machining operations that require contouring or finishing in tight spaces.
For detailed milling work
This cutter suits machinists who need a small-diameter ball nose for 3D profiling or corner-radius finishing. It is not intended for heavy material removal, high-feed roughing, or applications that demand a larger shank or more flutes.
2.0 mm diameter capacity
The 2.0 mm cutting diameter handles fine detail passes and shallow contours in a range of workpiece materials. Reach and depth of cut are limited by the necked geometry and two-flute configuration, so very deep cavities or aggressive chip loads will require a different tool.
Highlights
- 2-flute ball nose for smooth contour cuts
- 0 mm diameter suits fine-detail milling
- Necked shank clears deep pockets without interference
- TuffCut DM coating resists wear in abrasive materials
- California Prop 65 notice included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What spindle or collet do I need to hold the 2.0 mm shank?
Use a holder or collet that accepts a 2.0 mm shank; common ER collet sets include a 2.0 mm size.
Can I run this 2-flute ball nose in the same job as my older 4-flute end mills?
Yes — the 2-flute geometry clears chips differently, so adjust feed and speed when switching tools.
How do I confirm the 35 mm neck reach is engaged correctly after setup?
Measure from the tool tip to the spindle face; the necked section should show 35 mm of clearance before the shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
