M.A. Ford
M.A. Ford Tuffcut Al 2 Flute End Mill 12.0mm 13547241
Two-flute end mill with a 12.0 mm cutting diameter for aluminium machining
- TypeCutting Tools
- Precision milling with 2-flute design for aluminium
- 0 mm diameter suits standard tool holders
- M.A. Ford manufacturing ensures consistent geometry
- New condition guarantees full tool life
- California Proposition 65 warning applies to this item
Precision aluminium milling tool
The M.A. Ford Tuffcut Al 2 Flute End Mill with 12.0 mm diameter is engineered for high-speed machining of aluminium and non-ferrous alloys. Its two-flute geometry provides efficient chip evacuation and a smooth surface finish. This cutter suits CNC operators and job-shop machinists who need reliable material removal rates in soft metals. It is not intended for hardened steels, exotic alloys or heavy interrupted cuts that demand higher flute counts.
Thermal and power behaviour in cutting
During normal aluminium milling the tool runs cool because the polished flutes reduce friction and the large gullet clears chips quickly. Lower cutting forces mean the spindle draws less power and vibration stays minimal, so machine bearings and holders see reduced wear. The design does not address dry machining of abrasive composites or high-temperature superalloys where specialised coatings become necessary.
Proposition 65 notice and supply terms
California Proposition 65 warnings state this product contains chemicals known to cause cancer and reproductive harm, so operators should follow standard shop hygiene and ventilation practices. Orders valued at 75 or more qualify for free manufacturer-direct shipping, which simplifies restocking for production environments. No coolant, tool holders or software are bundled with the cutter.
Highlights
- Precision milling with 2-flute design for aluminium
- 0 mm diameter suits standard tool holders
- M.A. Ford manufacturing ensures consistent geometry
- New condition guarantees full tool life
- California Proposition 65 warning applies to this item
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
How is the 12.0 mm Tuffcut Al end mill secured in the tool holder, and what step is often missed?
Clamp the 12.0 mm shank in a collet or hydraulic holder rated for that diameter, then torque to the holder maker’s spec; the step often missed is verifying run-out with a dial indicator before cutting.
What maintenance or replacement will the 2-flute 13547241 end mill need after extended use?
The carbide flutes will dull; plan to re-grind or replace the tool once edge wear reaches the holder maker’s wear limit, and inspect the shank for fretting each change.
What limit appears first on the 12.0 mm Al end mill during prolonged slotting in aluminium?
Chip evacuation in the two flute gullets becomes the bottleneck; heat builds once chips pack, so reduce axial depth or increase coolant pressure before the tool overheats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
