M.A. Ford
M.A. Ford HPDCR2812A Twister HPD coolant drill 9/32
Drills precise holes with internal coolant delivery for efficient chip removal
- Twister HPD design delivers high-performance drilling
- Coolant-through capability improves tool life and chip evacuation
- 5× diameter drilling depth extends reach in deep holes
- 9/32 inch cutting diameter suits precise hole sizing
- California Proposition 65 warning informs safe handling requirements
M.A. Ford HPDCR2812A Twister HPD Coolant Drill 9/32
The M.A. Ford HPDCR2812A Twister HPD coolant drill is a high-performance cutting tool designed for precision holemaking in demanding materials. Its through-coolant design delivers lubricant directly to the cutting zone, improving chip evacuation and extending tool life during deep-hole drilling operations. This 9/32 inch diameter drill suits machinists and maintenance technicians who require reliable performance in production or repair environments.
Suited for high-production drilling
This drill suits workshops running CNC machines or high-pressure coolant systems capable of feeding fluid through the tool holder. It is not suited for hand-held drilling, low-pressure coolant setups, or machines without through-spindle coolant capability. Buyers needing a standard twist drill for manual use or flood-coolant-only applications should look at a different tool style.
9/32 inch diameter with 5x diameter flute length
The 9/32 inch cutting diameter determines the hole size this tool produces, while the 5x diameter flute length (indicated by the 5X designation) defines its maximum effective drilling depth relative to diameter. Verify that your workpiece thickness and machine clearance match this depth-to-diameter ratio before selecting this drill. California Proposition 65 warnings apply: the product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Highlights
- Twister HPD design delivers high-performance drilling
- Coolant-through capability improves tool life and chip evacuation
- 5× diameter drilling depth extends reach in deep holes
- 9/32 inch cutting diameter suits precise hole sizing
- California Proposition 65 warning informs safe handling requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle accepts the 9/32 inch shank on this Twister HPD drill?
A CNC or mill spindle with a 9/32 inch collet or chuck will hold the shank securely for coolant-through operation.
Can the 5×D flute length reach full depth in a part already drilled with a shorter 3×D tool?
Yes, the longer flute clears chips past the earlier hole depth without re-cutting the entrance.
How do I confirm coolant is flowing through the drill after installation?
Watch for a steady stream exiting the tip at the programmed pressure; interrupted flow means a blockage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
