M.A. Ford
M.A. Ford HPDCR1200A Twister HPD Coolant Drill 5X No 31
Coolant-fed high-performance drill with 5× capability, model number 31
- Twister HPD design optimises coolant delivery for efficient drilling
- 5X performance rating supports demanding high-speed applications
- Model HPDCR1200A identifies this specific drill configuration
- Size number 31 matches precise hole-making requirements
- California Proposition 65 warning informs safe handling practices
M.A. Ford HPDCR1200A Twister HPD Coolant Drill 5X
This M.A. Ford HPDCR1200A Twister HPD Coolant Drill is a high-performance cutting tool designed for precision drilling operations. It utilizes a 5X diameter coolant-through design to deliver efficient chip evacuation and temperature control. The tool is supplied new and intended for demanding machining applications requiring accurate hole production.
Users needing 5X coolant-through drilling
Machinists and manufacturers requiring a 5X diameter drill with internal coolant delivery for deep-hole drilling in tough materials will find this tool suitable. It is not intended for buyers who need a different drill length, diameter, or point geometry. Those without high-pressure coolant systems on their machine tools should look at alternative drilling solutions.
Drill size No 31
The defining specification for this cutting tool is the drill size No 31, which determines the exact hole diameter it produces. Selecting the correct size is critical for achieving the required fit and tolerance in the finished workpiece. Verify this specific size matches the engineering drawing or bill of materials before ordering.
Highlights
- Twister HPD design optimises coolant delivery for efficient drilling
- 5X performance rating supports demanding high-speed applications
- Model HPDCR1200A identifies this specific drill configuration
- Size number 31 matches precise hole-making requirements
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What chuck size does the HPDCR1200A Twister HPD Coolant Drill 5X No 31 require?
The drill uses a standard chuck compatible with the No 31 shank; verify the chuck capacity matches the 5X diameter before mounting.
How do I connect coolant to the HPDCR1200A Twister HPD Coolant Drill 5X No 31 and what step is often missed?
Attach the coolant hose to the through-spindle port, then purge air from the line before starting the cut; skipping the purge causes intermittent flow.
When should the coolant seals on the HPDCR1200A Twister HPD Coolant Drill 5X No 31 be replaced?
Inspect seals after every 1,200 holes or if coolant leaks appear; replace them at the first sign of wear to maintain pressure integrity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
