M.A. Ford
M.A. Ford HPDCR 1580A Twister HPD coolant drill 5x 15.80 mm
A Twister HPD coolant drill with a 15.80 mm diameter and 5x length for high-performance drilling
- Twister HPD design enables high-performance coolant drilling
- 5x diameter reach suits deep-hole applications
- 80 mm cutting diameter for precise hole sizing
- M.A. Ford brand backs professional-grade tool quality
- California Prop 65 notice informs safe handling practices
Twister HPD Coolant Drill 15.80 mm
The M.A. Ford HPDCR 1580A is a high-performance coolant drill built for demanding drilling tasks. Its 5x design provides extended reach while internal coolant delivery improves chip evacuation and tool life. This new cutting tool targets professional machinists and maintenance teams requiring precision holes in tough materials.
Suited for deep-hole drilling in steel and alloys
Operators needing coolant-through capability for deep, accurate holes will benefit from the 15.80 mm diameter and 5x length ratio. Shops without high-pressure coolant systems or those drilling shallow holes in softer materials should consider standard twist drills instead. The Proposition 65 notice also applies for regulated environments.
15.80 mm diameter with 5x depth capacity
The drill comfortably handles holes up to five times its diameter in a single pass, reducing cycle time and improving straightness. Coolant flow extends the working range in heat-sensitive alloys where dry drilling fails. Beyond the 5x depth ratio, peck drilling or specialised gun drills become necessary to maintain accuracy.
Highlights
- Twister HPD design enables high-performance coolant drilling
- 5x diameter reach suits deep-hole applications
- 80 mm cutting diameter for precise hole sizing
- M.A. Ford brand backs professional-grade tool quality
- California Prop 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What coolant system must I already have to use the 15.80 mm Twister HPD drill?
The drill is built for through-coolant delivery at high pressure; your machine must supply coolant through the spindle at the pressure the tool requires.
Will the 1580A fit in my existing drill holder or collet?
The 15.80 mm shank needs a holder or collet that accepts that exact diameter; check your holder’s clamping range before installing.
How can I confirm the drill is cutting correctly after setup?
Watch for steady chip evacuation through the coolant holes, consistent hole diameter at 15.80 mm, and no unusual vibration or noise during the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
