M.A. Ford
M.A. Ford HPDCR 1570A Twister HPD Coolant Drill 5X 15.70mm
High-performance coolant drill with 5x diameter capability for 15.70mm holes
- 5x coolant-fed drilling depth for efficient chip evacuation
- 70 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- Twister HPD design optimises high-performance drilling operations
- California Proposition 65 compliance discloses regulated chemical presence
15.70 mm coolant drill overview
The M.A. Ford HPDCR 1570A Twister HPD is a 15.70 mm high-performance coolant drill designed for 5X diameter drilling depth. It targets machine shops and metalworking professionals who need efficient chip evacuation and cooling in deep-hole applications. The tool arrives new and ships directly from the manufacturer.
Suited for deep-hole metalwork
This drill suits operators running CNC or rigid manual machines with through-coolant capability who require a 15.70 mm diameter and 5X depth ratio. It is not for buyers needing a different diameter, a longer or shorter flute length, or a tool without internal coolant channels. Hand-held drilling without coolant supply will not achieve intended performance.
15.70 mm diameter decides fit
The single specification that determines compatibility is the 15.70 mm cutting diameter. The hole to be produced must match this exact size. California Proposition 65 notices apply: the product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Highlights
- 5x coolant-fed drilling depth for efficient chip evacuation
- 70 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- Twister HPD design optimises high-performance drilling operations
- California Proposition 65 compliance discloses regulated chemical presence
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 15.70 mm cutting diameter wear enough to need resharpening or replacement during high-volume drilling?
The solid-carbide Twister HPD drill resists wear far longer than HSS, but the cutting edges will eventually dull; plan on professional resharpening or replacement once hole quality drops.
What limit appears first when the 1570A runs continuously in tough alloys — chip evacuation or coolant pressure?
In sustained cuts the 5×D flute length can pack chips before coolant clears them, so chip evacuation typically becomes the bottleneck.
How much heat and noise does the 15.70 mm drill generate when it runs all day in a CNC cell?
Expect high cutting-zone heat that the through-coolant design manages, and noise levels typical for solid-carbide drills at recommended speeds and feeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
