M.A. Ford
M.A. Ford HPDCR 0920A Twister HPD coolant drill 9.20 mm
A 9.20 mm high-performance coolant drill designed for precision drilling applications
- 20 mm diameter drills precise holes
- 5x coolant-fed design clears chips efficiently
- Twister HPD geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
- California Prop 65 warning informs safe handling
M.A. Ford 9.20 mm HPDCR drill
The M.A. Ford HPDCR 0920A Twister HPD coolant drill is a 9.20 mm high-performance cutting tool designed for precision drilling in demanding workshop environments. It suits machinists and fabricators who require accurate hole-making with integrated coolant delivery.
Sustained cutting with coolant feed
Internal coolant channels supply lubricant directly to the cutting zone during extended operations, helping to manage heat and evacuate chips without interrupting the cycle. This design supports consistent performance on deep or repeated holes where external flood coolant may not reach effectively.
Straight shank fit for standard holders
The drill uses a straight shank that seats in common collets, chucks or tool holders without proprietary adapters. Installation issues typically arise when the holder run-out exceeds tolerance or when coolant pressure is insufficient to activate the through-tool flow, leading to premature wear or chip packing.
Highlights
- 20 mm diameter drills precise holes
- 5x coolant-fed design clears chips efficiently
- Twister HPD geometry reduces cutting forces
- M.A. Ford manufacturing ensures consistent quality
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 9.20 mm Twister HPD coolant drill generate noticeable heat or vibration during continuous high-speed drilling?
The through-coolant design directs fluid to the cutting zone, which helps control temperature and chip evacuation during extended use.
What tool holder or machine spindle is required to run this 9.20 mm drill?
It requires a holder that accepts a 9.20 mm shank, such as a compatible hydraulic, shrink-fit or precision collet chuck on a CNC machining centre.
Will this 9.20 mm coolant-fed drill work reliably in an older CNC machine with lower coolant pressure?
The drill is engineered for high-pressure coolant systems; reduced pressure may limit chip flushing and tool life in deeper holes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
