M.A. Ford
M.A. Ford HPDCR 0600A Twister HPD Coolant Drill 6.00 mm
A 6.00 mm HPD coolant drill designed for high-performance drilling applications
- 00 mm diameter drills precise holes in metal
- 5× flute design removes chips faster for smoother cuts
- Coolant-through channels extend tool life under heavy use
- M.A. Ford brand trusted by professional machinists
- Ships directly from manufacturer for authentic quality
Twister HPD coolant drill 6.00 mm
The M.A. Ford HPDCR 0600A is a 5X diameter coolant-through drill with a 6.00 mm cutting diameter. It is built for high-performance drilling in a range of materials where through-tool coolant delivery improves chip evacuation and tool life. The product is supplied new and ships directly from the manufacturer.
Machinists needing 5X reach with coolant-through
This drill suits operators running CNC or rigid manual machines equipped for through-spindle coolant at the required pressure and flow. It is not for machines without coolant-through capability, for applications requiring a different diameter or length, or for hand-held drilling where coolant control cannot be maintained.
6.00 mm cutting diameter
The 6.00 mm diameter is the primary specification that determines whether this drill matches the hole size required by the job. Verify the diameter against the part drawing or process plan before ordering.
Highlights
- 00 mm diameter drills precise holes in metal
- 5× flute design removes chips faster for smoother cuts
- Coolant-through channels extend tool life under heavy use
- M.A. Ford brand trusted by professional machinists
- Ships directly from manufacturer for authentic quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
At what diameter does the drill reach its cutting limit?
The 6.00 mm diameter sets the maximum hole size this coolant-fed drill can produce in a single pass.
How much heat builds up during continuous drilling?
Internal coolant channels flush the cutting zone, carrying heat away so the tool stays cooler during extended cycles.
Which machine spindle accepts this shank?
A holder or collet sized for a 6.00 mm shank is required to mount the drill securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
