M.A. Ford
M.A. Ford Cyclone Xd 8X coolant-fed double-margin drill 6.60 mm
A coolant-fed double-margin drill with 6.60 mm diameter for deep-hole machining
- 8x diameter drilling depth capability
- Coolant-fed design delivers lubrication directly to cutting zone
- Double margin construction improves hole straightness and surface finish
- 60 mm diameter suits precise metric hole requirements
- California Proposition 65 listed for cancer and reproductive harm awareness
Cyclone Xd 8X coolant-fed drill
The M.A. Ford Cyclone Xd 8X is a new coolant-fed double-margin drill with a 6.60 mm cutting diameter. It is designed for production drilling where through-tool coolant delivery and guided margins improve hole quality and tool life. This item ships directly from the manufacturer.
Suited for high-volume drilling operations
The double-margin design and internal coolant channel suit shops running deep-hole or high-penetration cycles in difficult materials. It is not intended for hand-held use, machines without through-spindle coolant capability, or applications requiring a different diameter or step geometry.
6.60 mm diameter with 8× depth capacity
The 6.60 mm drill comfortably handles holes up to eight times diameter deep with consistent chip evacuation. Coolant pressure and machine rigidity determine practical limits; insufficient flow or run-out will reduce achievable depth and finish quality.
Highlights
- 8x diameter drilling depth capability
- Coolant-fed design delivers lubrication directly to cutting zone
- Double margin construction improves hole straightness and surface finish
- 60 mm diameter suits precise metric hole requirements
- California Proposition 65 listed for cancer and reproductive harm awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle interface is required to run this 6.60 mm coolant-fed drill?
The drill shank must match your machine’s tool holder — typically a standard cylindrical shank for coolant-through holders — so verify the holder accepts a 6.60 mm diameter shank with internal coolant delivery.
Can this 8X drill be used in a holder designed for shorter 3X or 5X tools?
An 8X length drill needs more clearance and a holder that grips further back; a shorter-tool holder may not provide enough clamping length or coolant sealing for this 6.60 mm drill.
How do I confirm coolant is reaching the cutting zone on this double-margin drill?
Watch for a steady coolant stream exiting the flute holes at the drill tip while the spindle rotates; consistent flow means the internal passages and machine coolant system are working correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
