M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 6.10 mm
Coolant-fed double-margin drill with 6.10 mm diameter for deep-hole precision
- Cyclone Xd design delivers 8× diameter drilling depth
- Coolant-fed channels evacuate chips for cleaner holes
- Double-margin geometry improves hole straightness and finish
- 10 mm diameter suits precise metric applications
- New condition ensures full factory performance from first use
Purpose-built drill for deep-hole work
The Cyclone Xd 8X Coolant Fed Double Margin Drill is a 6.10 mm cutting tool designed for high-performance drilling in demanding materials. Its internal coolant channels and double-margin geometry support straight, accurate holes at 8× diameter depth. Machinists running CNC centres or dedicated deep-hole machines will find it suited to production jobs where chip evacuation and hole quality are critical.
Replaces standard twist drills
Conventional drills without through-coolant or with only one guiding margin tend to wander and overheat beyond 3× to 5× diameter. This tool extends reliable depth to 8× while maintaining diameter tolerance and surface finish. The upgrade pays off when cycle time, tool life or scrap rate on deep holes become bottlenecks, especially in tough alloys or cross-hole intersections.
Fits standard 6.10 mm toolholders
The shank matches common collet and hydraulic holders, so no special adapters are required. Machine must deliver coolant through the spindle at sufficient pressure to clear chips from the flutes; inadequate flow is the most common cause of premature wear or breakage. Verify holder runout and coolant filtration before the first cut.
Highlights
- Cyclone Xd design delivers 8× diameter drilling depth
- Coolant-fed channels evacuate chips for cleaner holes
- Double-margin geometry improves hole straightness and finish
- 10 mm diameter suits precise metric applications
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size drill chuck is needed for the 6.10 mm shank?
The drill has a 6.10 mm diameter shank, so a chuck that opens to at least 6.10 mm is required.
How should the coolant-fed drill be connected to avoid dry drilling?
Connect the machine's through-spindle coolant system to the drill's internal coolant hole before starting; running without coolant will overheat the cutting edges.
When should the double-margin drill be replaced?
Replace the drill when the double margins show visible wear or when hole diameter exceeds tolerance, as regrinding the specialized geometry is not practical.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
