M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 3.30 mm
Coolant-fed double-margin drill with 8× diameter reach, 3.30 mm cutting diameter
- Coolant-fed design clears chips from deep holes
- Double-margin construction keeps the drill running true
- 30 mm diameter suits precise drilling tasks
- 8× diameter reach handles extended-depth applications
- Cyclone Xd geometry improves cutting efficiency
Cyclone Xd 3.30 mm drill
The M.A. Ford Cyclone Xd is a coolant-fed, double-margin drill with an 8X flute length and a 3.30 mm cutting diameter. It is built for high-precision holemaking in demanding materials where controlled chip evacuation and hole straightness are critical.
For deep-hole precision work
This drill suits machinists and manufacturers running CNC equipment with through-spindle coolant who need consistent performance in deep holes. It is not for handheld drilling, machines without coolant delivery, or applications that require a different diameter or flute geometry.
3.30 mm cutting diameter
The 3.30 mm diameter is the single specification that determines whether this tool matches the hole size required by the job. Verify the target hole tolerance and material compatibility before selecting this drill.
Highlights
- Coolant-fed design clears chips from deep holes
- Double-margin construction keeps the drill running true
- 30 mm diameter suits precise drilling tasks
- 8× diameter reach handles extended-depth applications
- Cyclone Xd geometry improves cutting efficiency
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 3.30 mm Cyclone Xd drill so the coolant-fed channels align correctly?
Mount the drill in a holder that matches the double-margin shank, then connect the machine’s through-spindle coolant supply directly to the drill’s internal feed ports before tightening.
What maintenance will the 3.30 mm Cyclone Xd drill need after extended use?
Inspect the double-margin lands and coolant ports for wear or blockage; replace the drill when the margins no longer guide the hole or when coolant flow drops below effective pressure.
What limit appears first when running the 3.30 mm Cyclone Xd drill continuously in tough material?
The double-margin lands wear faster than the cutting edges, so margin degradation becomes the limiting factor before the drill’s overall diameter loss reaches 3.30 mm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
