M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 3.10 mm
Coolant-fed double-margin drill bit for 3.10 mm holes with 8× diameter depth capability
- 8x diameter reach for deep holes
- coolant-fed design clears chips efficiently
- double margin construction improves hole accuracy
- 10 mm diameter suits precision drilling
- new condition ensures full tool life
Precision Drilling Tool
The M.A. Ford Cyclone Xd is an 8X coolant-fed double margin drill with a 3.10 mm diameter. It is manufactured for machinists and maintenance teams who need accurate hole-making in metal components. The solid carbide construction supports high-performance drilling in demanding workshop environments. This item is supplied new from the brand.
Integrated Coolant Delivery
Internal coolant channels feed cutting fluid directly to the drill point through the double margin design. This arrangement improves chip evacuation and temperature control during deep-hole operations. The 8X length-to-diameter ratio allows extended reach without a separate pilot drill. No external coolant accessories are required for the system to function.
Direct Spindle Mounting
The drill fits standard tool holders that accept a 3.10 mm shank, enabling quick changeover on CNC machines or manual mills. Operators should verify holder runout and coolant pressure before starting a cycle. California Proposition 65 warnings apply because the product contains listed chemicals. Proper ventilation and personal protective equipment are recommended during use.
Highlights
- 8x diameter reach for deep holes
- coolant-fed design clears chips efficiently
- double margin construction improves hole accuracy
- 10 mm diameter suits precision drilling
- new condition ensures full tool life
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 3.10 mm double-margin drill need resharpening?
Resharpening interval depends on material hardness and coolant quality; plan to inspect the cutting edges after each production run and regrind when flank wear reaches the manufacturer's recommended limit.
What stops the 8X coolant-fed drill from running deeper in a single pass?
The 8X diameter-to-depth ratio sets the maximum hole depth; chip evacuation and coolant pressure become the limiting factors once that ratio is reached.
How hot does the 3.10 mm drill get during continuous drilling?
With proper coolant flow through the internal channels the tool body stays near coolant temperature; excessive heat signals insufficient flow or incorrect speed and feed settings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
