M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 11.00 mm
Coolant-fed double-margin drill cuts 11.00 mm holes at 8× diameter depth
- 00 mm diameter drills precise holes
- Coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd 8X geometry supports deep drilling
- New condition ensures full tool life
Application focus
This Cyclone Xd drill is engineered for production drilling at eight times the diameter, using internal coolant delivery to reach 11.00 mm holes in tough alloys. The double-margin design improves hole straightness and surface finish for aerospace, automotive and general metal-working shops that need repeatable accuracy in deep-hole work.
Installation notes
The tool fits standard coolant-fed holders and requires a machine spindle capable of supplying cutting fluid through the shank at the pressure your process demands. Misalignment between the holder and spindle centre-line is the most common cause of premature margin wear and oversize holes, so verify run-out before starting a batch.
Pre-order checks
Confirm that your machine can deliver the required coolant volume and pressure through the tool’s internal channels, and that the work-holding arrangement keeps the part rigid enough for an 8×D depth-to-diameter ratio. The product carries a California Proposition 65 warning for substances linked to cancer and reproductive harm, so review your shop’s handling and ventilation procedures before use.
Highlights
- 00 mm diameter drills precise holes
- Coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd 8X geometry supports deep drilling
- New condition ensures full tool life
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the 11.00 mm drill is cutting correctly after setup?
Check that the coolant-fed channels deliver steady flow and the double margins produce a straight, consistent hole at the 11.00 mm diameter.
What comes in the box with the CXDCLM1100AP and what must I source separately?
The drill itself is supplied; coolant supply fittings, tool holder and work-holding fixtures are not included.
Which Cyclone Xd 8X version should I choose for an 11.00 mm hole?
Select the CXDCLM1100AP model, which is designated for the 11.00 mm size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
