M.A. Ford
M.A. Ford Cyclone Xd 5X Solid Double Margin Drill 10.20 mm
Solid double-margin drill cuts precise 10.20 mm holes in demanding materials
- Solid double-margin design improves hole accuracy
- 5x diameter drilling depth increases reach in one pass
- Cyclone Xd geometry enhances chip evacuation
- 20 mm diameter suits precise metric applications
- California Prop 65 notice informs safe handling
10.20 mm solid double-margin drill
The M.A. Ford Cyclone Xd 5X is a solid double-margin drill with a 10.20 mm cutting diameter. It is designed for precision hole-making in ferrous and non-ferrous materials. Professional machinists and maintenance technicians use it for accurate, repeatable drilling operations.
Double-margin design and shank fit
The double-margin geometry provides four-point contact for improved hole straightness and surface finish. A cylindrical shank allows direct clamping in standard drill chucks or collet holders. The solid carbide construction resists wear and maintains dimensional stability through extended production runs.
Carbide tool limits and safety note
Solid carbide offers high hardness but can chip under heavy interruption or unstable fixturing. The tool has no internal coolant channels, so external flood or mist cooling is required for deep holes. California Proposition 65 warnings indicate the product contains chemicals linked to cancer and reproductive harm.
Highlights
- Solid double-margin design improves hole accuracy
- 5x diameter drilling depth increases reach in one pass
- Cyclone Xd geometry enhances chip evacuation
- 20 mm diameter suits precise metric applications
- California Prop 65 notice informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 10.20 mm Cyclone Xd drill use, and what maximum drill depth does that standard allow?
The drill has a straight round shank that fits standard drill chucks and collets, and the 5×D design allows a maximum drilling depth of about five times the 10.20 mm diameter.
What machine spindle and holder dimensions are required to mount this 10.20 mm solid carbide drill?
The 10.20 mm diameter shank needs a matching 10.20 mm collet or three-jaw chuck capacity, and the holder must accept the full flute length of the 5×D tool.
How is the Cyclone Xd 5X drill installed in a CNC or manual machine, and what common mistake should be avoided?
Insert the shank fully into the collet or chuck, tighten evenly to the recommended torque, and do not clamp on the fluted section — that causes run-out and premature wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
