M.A. Ford
M.A. Ford Cyclone Xd 5X Double Margin Drill 7.80mm
A solid carbide double-margin drill delivers five-times-diameter depth in a single pass
- Solid double-margin design improves hole straightness
- 5× diameter drilling depth reduces tool changes
- 80 mm diameter suits precise metric holes
- M.A. Ford construction delivers professional-grade durability
- Cyclone Xd geometry optimises chip evacuation
Cyclone Xd 5X Double Margin Drill 7.80 mm
The M.A. Ford Cyclone Xd 5X is a solid carbide drill engineered with a double margin design. It targets professionals who need precise hole geometry and improved surface finish in demanding materials. The five times diameter capability allows deeper drilling in a single pass without pecking cycles. This accessory fits standard industrial tool holders for CNC and manual machines.
Suited for high-precision production runs in tough
Machinists working with stainless steel, titanium or high-temperature alloys will benefit from the enhanced stability and chip evacuation. The double margins guide the tool straighter, reducing walk and improving roundness on deep holes. Shops that primarily drill soft aluminium or plastics in shallow depths may find a standard single-margin drill more economical for their daily work.
The 7.80 mm cutting diameter decides fit
This specific size determines whether the drill matches the required hole specification in your print or bill of materials. Verify the nominal diameter against the engineering drawing before ordering. The 5X length-to-diameter ratio fixes the flute length, so the workpiece thickness and fixture clearance must accommodate that reach. No other dimension in the data alters compatibility.
Highlights
- Solid double-margin design improves hole straightness
- 5× diameter drilling depth reduces tool changes
- 80 mm diameter suits precise metric holes
- M.A. Ford construction delivers professional-grade durability
- Cyclone Xd geometry optimises chip evacuation
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 7.80 mm Cyclone Xd 5X drill generate during continuous operation?
The solid carbide construction and double-margin design reduce friction, limiting heat build-up during extended drilling cycles.
What tool holder or machine spindle is required to run the 7.80 mm drill?
A standard drill chuck or collet that accepts a 7.80 mm shank is needed; the drill has a straight shank with no special drive flats.
Will the 7.80 mm drill work in an older drill press with limited run-out tolerance?
The double-margin geometry improves guidance and stability, helping maintain hole quality even on machines with modest spindle precision.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
