M.A. Ford
M.A. Ford Cyclone Xd 5X Double Margin Drill 1/4
Solid double-margin drill bit creates accurate 1/4-inch holes with five-times diameter reach
- Solid double-margin design improves hole accuracy
- Cyclone Xd 5X geometry extends tool life
- 1/4 inch diameter suits common drilling tasks
- M.A. Ford manufacturing ensures professional quality
- California Proposition 65 warnings apply to this product
Drill for deep-hole drilling
The M.A. Ford Cyclone Xd 5X is a solid double-margin drill built for production environments that need accurate holes at five times the diameter. Its 1/4 inch size suits metalworking shops running CNC machines or rigid manual setups. The double-margin design guides the tool to maintain straightness and finish in deep cuts. This new accessory targets machinists who prioritise hole quality over quick-change convenience.
Upgrade from standard parabolic drills
Shops moving up from conventional parabolic-flute drills gain the 5X length capability without adding a peck cycle for every hole. The jump is worth it when cycle time matters and the machine spindle has the rigidity to run the recommended 2500 RPM. It does not suit low-rigidity routers or hand-held drilling where run-out would defeat the margin guidance.
Build integration and clearance
The straight shank fits standard ER collets or Weldon holders so no special chucking system is required. Through-coolant capability is not featured, so external flood or mist must clear chips from the flutes. The solid carbide construction frees up tool-change slots because one drill covers the depth range that would otherwise need a stub and a long series. Buyers needing coolant-through or carbide-tipped alternatives should look elsewhere.
Highlights
- Solid double-margin design improves hole accuracy
- Cyclone Xd 5X geometry extends tool life
- 1/4 inch diameter suits common drilling tasks
- M.A. Ford manufacturing ensures professional quality
- California Proposition 65 warnings apply to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size chuck is required for the 1/4 inch shank?
The drill has a 1/4 inch shank, so a chuck that accepts 1/4 inch bits is needed for a secure fit.
How should the drill be seated in the chuck to avoid runout?
Insert the shank fully and tighten the chuck evenly on all jaws to prevent the double margin from wobbling during use.
When should the drill be replaced based on wear?
Replace the drill when the cutting edges dull or the double margins show excessive wear, as this affects hole quality and tool life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
