M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 9.90 mm
A coolant-fed double-margin drill with 5× diameter depth capability for 9.90 mm holes
- 5x diameter drilling depth for faster through-holes
- Coolant-fed design clears chips and reduces heat
- Double margin construction improves hole accuracy
- 90 mm diameter suits precise metric applications
- California Proposition 65 warning for regulated substances
Cyclone Xd 5X Drill 9.90 mm
This solid-carbide drill is engineered for high-performance hole-making in demanding materials. The double-margin design improves hole straightness and surface finish while the coolant-fed core delivers fluid directly to the cutting zone. It suits production shops that need reliable deep-hole capability without peck cycles. The 9.90 mm diameter fits standard metric tooling requirements.
Coolant-fed double-margin construction
Internal coolant channels evacuate chips efficiently and reduce heat at the cutting edges. Two ground margins guide the drill, minimising wander and improving roundness in deep holes. The shank fits common hydraulic or shrink-fit holders for rigid clamping. No external coolant plumbing is required beyond standard machine-tool provision.
Thermal control and power efficiency
Direct coolant flow keeps cutting temperatures low, extending tool life and allowing higher feed rates. Reduced heat also lowers the risk of workpiece distortion in heat-sensitive alloys. Stable cutting forces mean consistent spindle load and predictable power draw during extended cycles. The design avoids excess friction that can accelerate margin wear.
Highlights
- 5x diameter drilling depth for faster through-holes
- Coolant-fed design clears chips and reduces heat
- Double margin construction improves hole accuracy
- 90 mm diameter suits precise metric applications
- California Proposition 65 warning for regulated substances
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What coolant feed standard does the 9.90 mm Cyclone Xd 5X drill use, and what flow rate does it cap in practice?
The drill is designed for through-coolant delivery via the machine spindle; the maximum flow is limited by the spindle and coolant pump, not by the tool itself.
What shank diameter and holder type are required to mount the 9.90 mm Cyclone Xd 5X drill?
The shank matches the 9.90 mm cutting diameter and fits standard hydraulic, shrink-fit or collet holders sized for that diameter.
How is the Cyclone Xd 5X drill installed, and which step is most often done incorrectly?
Insert the shank fully into a clean, matched holder, torque to the holder manufacturer's spec, then verify coolant flows through the tool before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
