M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 9.00 mm
A coolant-fed double-margin drill with 9.00 mm diameter for 5×D deep-hole drilling
- 00 mm diameter drills precise holes in one pass
- Coolant-fed design clears chips and reduces heat buildup
- Double margin construction keeps the drill stable and straight
- Cyclone Xd geometry extends tool life in tough materials
- 5X flute length reaches deeper bores without repositioning
Cyclone Xd 5X Drill 9.00 mm
The M.A. Ford Cyclone Xd is a coolant-fed double margin drill built for high-precision holemaking. Its 5X diameter design supports deep drilling in demanding materials. The tool arrives new and ships directly from the manufacturer. California Proposition 65 warnings apply to this product.
Who This Suits
Machinists needing a rigid, coolant-fed drill for accurate deep holes at 9.00 mm will benefit from the double margin design. Shops without through-spindle coolant capability or those requiring different diameters or lengths should consider alternative tooling options.
9.00 mm Diameter Decides Fit
The 9.00 mm cutting diameter is the critical specification for hole size compatibility. Verify this matches the required finished hole tolerance before purchase. The 5X length ratio determines maximum drilling depth reach. California Proposition 65 compliance is noted for workplace safety.
Highlights
- 00 mm diameter drills precise holes in one pass
- Coolant-fed design clears chips and reduces heat buildup
- Double margin construction keeps the drill stable and straight
- Cyclone Xd geometry extends tool life in tough materials
- 5X flute length reaches deeper bores without repositioning
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat and power draw should I expect when running the 9.00 mm Cyclone Xd drill continuously all day?
The drill is a 9.00 mm coolant-fed double-margin design; the supplied coolant flow manages heat during extended use and power draw matches the machine spindle rating.
What existing tooling or machine setup is required for the CXDCR 0900AP to operate correctly?
You need a CNC or milling spindle with through-coolant capability and a holder that accepts a 9.00 mm shank drill.
Will the 9.00 mm double-margin drill work reliably in older machining centres that lack high-pressure coolant?
The double-margin geometry improves hole straightness, but the drill is engineered for coolant-fed operation; low-pressure systems may reduce chip evacuation and tool life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
