M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 31/64
Coolant-fed double-margin drill with 5X flute design drills 31/64 inch holes efficiently
- Coolant-fed design delivers lubrication to the cut zone
- Double-margin construction keeps the drill stable in deep holes
- 5× diameter reach handles extended drilling tasks
- 31/64 inch diameter suits precise hole requirements
- Brand-new M.A. Ford tool ready for workshop use
31/64 Double-Margin Drill
The M.A. Ford Cyclone Xd 5X is a coolant-fed drill built for precision hole-making in demanding materials. Its double-margin design stabilises the tool during deep cuts, improving roundness and surface finish. Professional machinists and maintenance teams select this bit when consistent accuracy is required across repeated operations.
Coolant-Fed Shank and Margin Geometry
Internal coolant channels deliver fluid directly to the cutting zone, reducing heat buildup and extending tool life in tough alloys. The twin margins guide the drill along the hole walls, minimising wander and vibration on CNC machines or rigid manual setups. This construction suits high-volume production where chip evacuation and thermal control are critical.
Verify Machine Coolant Capability and Holder Fit
Confirm your spindle or turret supplies through-tool coolant at the pressure and flow the operation demands. Ensure the shank diameter matches your collet, hydraulic holder or shrink-fit system without adapters that could restrict flow. Check that the workpiece material and depth-to-diameter ratio align with a 5X design before committing to the job.
Highlights
- Coolant-fed design delivers lubrication to the cut zone
- Double-margin construction keeps the drill stable in deep holes
- 5× diameter reach handles extended drilling tasks
- 31/64 inch diameter suits precise hole requirements
- Brand-new M.A. Ford tool ready for workshop use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 31/64 drill use?
The drill has a straight shank that fits standard 31/64 drill chucks and collets without an adapter.
What machine clearance does the 31/64 drill need?
The 5X length requires enough spindle travel and work-zone depth for the full flute plus coolant clearance.
How do I start the coolant feed correctly?
Connect coolant through the machine spindle before engaging the cut so the internal channels prime from the first revolution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
